Royal Sovereign NPH-900N Manuel du propriétaire télécharger pdf (Page 13)

2. COLD LAMINATING

1. Press the power button to turn on.

2. Press

3. It is ready when LCD window shows and the buzzor rings three times.

4. Insert document into a Royal Sovereign cold laminating pouch as follows.

1) Prepare cold pouch film.

2) Remove protective paper inside cold pouch.

(Be careful not to allow the pouch to close and

seal itself closed. If the pouch closes on itself

and seals,you will not be able to the document

to be laminated inside.)

3) Place document squarely into the pouch, where

the protecting paper was.

Cold film's minimum border of about 3mm(1/8")

is necessary to provide a proper edge seal.

4) Beware of dust while inserting document.

5) Feed pouch squarely into opening slot.

5. Finished laminated pouch will exit through rear of machine.

6. When you are finished laminating, press the power button to turn off.

If it has recently been used for hot lamination, allow the rollers to be

cooled down about 20~30 minutes.

**HOW TO ATTACH DOCUMENT ON COLD POUCH FILM**

***USEFUL INFORMATION***

Front

Bac k

HOT/COLD

EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Royal Sovereign NPH-900N Manuel du propriétaire Page 13